3 Steps to Get Your Lampshade Repaired

[Sawyer]

Often a lampshade doesn’t require much attention, as they won’t break unless not tampered. Other than, periodic maintenance, dusting, and cleaning, it would rarely happen that a lampshade will get damaged. Unless the lamp shade doesn’t face any extreme damage such as complete breakage or distortion, it is better to opt for a lamp shade repair than replacing it with a new one. Here are certain tricks to get the repair done with ease:

Conduct a periodic check on whether the shade has developed any dents. In case there are dents visible, add some water to a steam iron, plug it and hold it over the dent. However, make sure, the iron doesn’t touch the dented area. While continuing this with the other hand, push the dent area back to its position. Repeat this trick multiple times, till the dent gets completely fixed. Know the various nitty-gritty of repair by logging into the following website http://lightswitchmiami.com/.

Replace the trim with a fresh look by taping the area with cloth tape and craft glue. These will help to fix back the seam and shaded areas back to place.

Use brushes to get away from the dust and cobwebs stuck in between the ridges and folds. One can also use the hose of a vacuum cleaner to remove the dirt.

Using these simple tricks and tips one can carry on their lamp shade repair without much hassle and tension. However, one needs to take extra care while applying the glue in order to avoid it from falling into other areas of the lampshade.