Construction questions
Posted: Wed Jan 17, 2007 6:16 pm
So I am doing a minor fix-up of our basement and need some questions answered.
We have a 90 year old home with a basement that is ' slightly damp' Not wet, but a few spots leech a little moisture.
I am cleaning, scraping, patching and sterilizing, then painting the whole damn thing with Drylok and Killz to cover it and keep it dry.
Over half of the basement I want to float a raised floor. With pressure treated 1x4 or 2x4 floaters, then attaching 3/4 plywood over that. One, for a level surface as the cement floor is very old, irregular and bumpy. And two, to keep carpet off the floor directly.
So now, after I have waterproofed and painted the question is...
1. Do I lay a vapor barrier down directly onto the floor, then lay the floaters over it and attach the plywood to the floaters? My fear is that the plastic on the floor will prevent any moisture from evaporating creating a worse problem.
2. Lay the floaters down first, then attach the plastic to them and then the plywood? My fear is that moisture will be trapped and get to the floaters.
3. Use no vapor barrier at all to aid in circulation and allow any moisture to evaporate naturally?
Any other tips are welcomed.
We have a 90 year old home with a basement that is ' slightly damp' Not wet, but a few spots leech a little moisture.
I am cleaning, scraping, patching and sterilizing, then painting the whole damn thing with Drylok and Killz to cover it and keep it dry.
Over half of the basement I want to float a raised floor. With pressure treated 1x4 or 2x4 floaters, then attaching 3/4 plywood over that. One, for a level surface as the cement floor is very old, irregular and bumpy. And two, to keep carpet off the floor directly.
So now, after I have waterproofed and painted the question is...
1. Do I lay a vapor barrier down directly onto the floor, then lay the floaters over it and attach the plywood to the floaters? My fear is that the plastic on the floor will prevent any moisture from evaporating creating a worse problem.
2. Lay the floaters down first, then attach the plastic to them and then the plywood? My fear is that moisture will be trapped and get to the floaters.
3. Use no vapor barrier at all to aid in circulation and allow any moisture to evaporate naturally?
Any other tips are welcomed.