What is lightbox?

Non-music discussion. Discuss things that are on your mind or things that don't have anything to do with music. Lets try to keep it clean people, there are little children present.

Moderators: MrSpall, bassjones, sevesd93, zenmandan

Post Reply
panel123
Troll
Troll
Posts: 2
Joined: Wed Oct 10, 2018 2:00 pm
Location: Tehran,Iran
Contact:

What is lightbox?

Post by panel123 »

lightbox application:
In the manufacture of lightbox panels, they use luminous boxes usually made of plastic, wood or aluminum, put advertisements or posters in the box and use the back of this type of lighting panel, the inside of the picture. This panel can be easily changed. A professional designer will pay attention to the result of work and create an art lighting to create a sensation in the viewer on this type of panel.

This kind of panel is usually used inside the building, and a professional lighting on the photo inside this type of panel will make the work more attractive. Lightbox lighting is provided in both fluorescent and LED lighting.

Lightbox manufacturing method:
To get started, you need a frame, put a photo or a poster inside the frame, and use a led bar on the back of the frame to illuminate the light from the back of the work to a shimmering image and a special effect, if you have LED strips that have Fluorescent and sunny lights are used to improve the quality of work. Use an adapter to connect LEDs to power and use a transparent glass or plastic protective shield to protect your photos.

What is a crystal lightbox?
In this type of lightbox, unlike a typical lightbox for advertising and image display, you can print on a high-tech material. This type of lightbox is made of two plexiglas layers of thickness of 8 and 2 mm and is used between these two layers of the backlit printing. Replacing the printed design inside the panel by the customer is one of the benefits of this type of panel.

Crystal lightbox can be mounted on a gypsum wall, stone, mdf, roof and roof, the round can be cut in a non-ordinary square and rectangle mode.

There are several ways to print a layout on the lightbox:

Direct Printing on Hold

Print on sticker and then paste on hold

Print on backlight and then paste on hold

Lightbox standing and pendant

Designs inside this type of lightbox are cut with a laser device and stick on a plexiglass. To change the image of these lightboxes, you can open the screw around the frame and change the photo.

Application:
Inside the subway

Mobile market

cinema hall

Exhibit booths

Advantage of using the lightbox:
1- Low power consumption

2- Cost-effective economically

3- Switching inside box ads easily

4. High resistance

5. High quality

6. The light is completely and uniformly distributed to all surfaces.

7. Less energy is spent on other methods.

8- The photo used in the lightbox is easily replaced

9. Long durability

10- Possible to use wall-mount or pendant lightbox

11. Very low thickness
Post Reply